Description
This Fanuc A61L-0001-0079 monitor is a modern 8.4″ monochrome TFT LCD replacement display for the original 9″ monochrome CRT monitor that was fitted to the Fanuc 0, 0M, 0T, 6, 6MB, 6BT, 6T, 6B, 6M11, 11M, 11T controllers.
Original monitor: Fanuc A61L-0001-0079 , monochrome 9″ CRT
Replacement monitor: Tsubis LCD84-0079, 8.4″ monochrome TFT LCD
Controller: Fanuc 0, 0M, 0T, 6, 6MB, 6BT, 6T, 6B, 6M11, 11M, 11T
Monitor Manufacturer: D9MM-11A, MDT947B1A, MDT947B-1B, TX-901AB, KF-M7099H
Details of our replacement LCD for Fanuc A61L-0001-0079
- 8.4″ replacement-monitor for 9″ CRT monitors (monochrome) with following monitor codes:
- A61L-0001-0071
- A61L-0001-0072
- A61L-0001-0076
- A61L-0001-0079
- A61L-0001-0086
- A61L-0001-0092
- A61L-0001-0093
- MDT947B1A
- 100% compatible with the Fanuc 0T control
- Mechanical version: chassis mounted including seal
- Connection: Honda connector 20 pin. / 3-rows
- Input voltage: 24V DC
- LED Backlight
- Switchable text colours (green, white or yellow)
- Invert video mode (required on some Fanuc controls)
- Display resolution: 800 x 600 Pixel
- Brightness: 250 cd/m2
- Contrast ratio: 600:1
- Backlight approx. 20,000 operating hours
- Operating conditions: 0°C ~ 50°C operating temperature
- designed for 24/7 continuous operation
- 1 Year Warranty
- Our part number: LCD84-0079
Cable Connection
For the video connection, just plug in your existing video cable. Our LCD monitor is fitted with the same blue Honda connector.
Benefits of LCD verses CRT
Customers often ask us the benefits of upgrading to an LCD monitor compared to the repair or service exchange of their old CRT. Quite often it comes down to short term savings verses the long term benefits to your business. If short term cash flow is an issue then repair or exchange is possibly the lowest cost short term solution. But if you are looking for longer term benefits such as increased equipment up time, reduced running costs, or extending the life of your equipment, then LCD offers significant advantages. Here are some points that may help you with your decision:
- 1 Year Warranty
- all our LCD monitors have a full 1 Year Warranty and UK support.
- compare this to 6 month or less for a CRT repair or exchange warranty.
- ~50% reduction in power consumption
- our LCD monitors use modern, energy efficient electronics that consume far less electricity compared to a CRT monitor. Our LCD monitors draw less than 1.5 Amps compared to CRT’s which draw in excess of 3 Amps. This means lower electricity bills for your company.
- 24/7 operation
- our LCD monitors are designed for continuous operation and do not suffer from image burn on the screen, unlike a CRT.
- CE Marking
- all our LCD monitors are manufactured in Germany and have genuine CE markings (unlike many LCD suppliers). This is important for safety reasons and should be a key requirement for purchasing departments.
- Reliability
- manufactured to EN 55022 for EMC compatibility. Which means our monitors will not cause electrical interference with any equipment in your workshop. Interference can be the cause of weird or intermittent machine problems due to poorly repaired CRTs.
- manufactured to EN 55024. Our monitors are designed to be inherently immune to power surges, ESD damage (electrostatic discharge), and radio frequency interference. This is a vast improvement in equipment reliability which means increased machine up time and a reduction in unscheduled down time surprises.
- Equipment obsolescence
- CRTs are getting harder and more expensive to repair due to parts availability.
- This can cause unexpected extended repair times, “surprise” repair costs, or equipment being scrapped.
- Upgrading to our modern LCD monitors mitigates these risks and helps prolong the life of your equipment.
- Operator efficiency
- a happy machine operator is an efficient machine operator – or so they say…
- is your machine operator struggling to see the screen due to a dim display or fuzzy text?
- a modern LCD has a crisp, bright, clear display that is a joy to work with and has an instant impact on the look and feel of the machine.
Availability
Please contact our sales team by phone or email for delivery options
How To Order Your Replacement Monitor
Call us on +44 (0) 1438 362897 or Email.
We accept BACS payments and Credit/Debit cards.